These wall anchors are suitable for a variety of substrates like concrete, solid, perforated or hollow bricks, natural stones and marbles

The anchor bolt has new easy fix i.e relief thread is easier to tighten especially at a lower torque than traditional plugged fixings

Package contents : it includes 10 pieces of wall anchor fasteners kit of Size 6mm

The fastener drill the pilot hole direct into material and substrate and eliminates line up problems

No expansion force, unlike plugs or anchors you can place nearer the edge without risk of fracturing

Quantity: 12 Pcs Fastener.

Size: 8 MM, Total Length 6 Cm,

Very Easy To Use, Just drill the pilot hole direct into material and substrate,

Suitable for a variety of substrates - concrete, solid, perforated or hollow bricks, natural stone, marble etc.

Package includes: set of 12 anchor bolts

500 Pieces Clear (Close to crystal Color) Plastic loop Pins Fasteners (Hand Kimbles),, Choose Size

Can be used for multiple purposes, for tagging of soft toys, clothes, shoes, no Tag Gun Required

You do not need any tag gun, just snap by hands

Made of plastic, can not open by hands once locked, you need scissor to cut

These wall anchors are suitable for a variety of substrates like concrete, solid, perforated or hollow bricks, natural stones and marbles

The anchor bolt has new easy fix i.e relief thread is easier to tighten especially at a lower torque than traditional plugged fixings

Package contents : it includes 10 pieces of wall anchor fasteners kit of Size 8mm

The fastener drill the pilot hole direct into material and substrate and eliminates line up problems

No expansion force, unlike plugs or anchors you can place nearer the edge without risk of fracturing

Item: Pin type Anchor Fastener With bolt and washer, 10 x 75 mm, 6 Pieces

Round and smooth end for easy insertion, Drill bit diameter should same as Anchor diameter.

Flat and hard head prevent any damage in thread during installation, good to use in concrete and masonry / grout filled cmu, any hard bricks wall / plastered wall.

Hard Steel used with zinc plating to prevent any rust easly.

Dimention: - Diameter - 10 mm, Lendth - 70 mm, Pin Size - 4 mm dia, 70mm lendth

Need to use 16mm diameter drill bit for drilling holes, the drilling depth should great than or equal to 6 cm

Load bearing: 150 KG, Weight Of One Fasner Is about 120 Gram.

Screw diameter: Approx 10mm /0.4 inch

The Great Tool For Any House / Office, Just Take One And Use This Great Fastener Hook.

Package includes: set of 4 anchor bolts

Hook type Anchor Fastener for Hanging & SwingBrass Finished & Temperature resistance. Usage: Drill the pilot hole direct into material and substrate Variety of substrates: Concrete, Solid, Natural Stone & Marble etc

Load bearing: 250 KG, Approx, But Must insure that capacity of wall before you allly the load.

Ideal For many more things You can hammer this fastener into various kinds of substrates – be it concrete, solid, perforated or hollow bricks, natural stone, marble etc.

Themujtaba Gives you The Great Tool For Any House / Office, Just Take One And Use This Great Fastener Hook

HIGH QUALITY FULL STAINLESS STEEL - They are strong, corrosion resistant and long lasting.

GREAT TO KEEP AROUND - These are great to have around for when you need them most. Use in any application, Indoor or Outdoor or any condition and any environment.

EASY TO USE - Easy to use for Multiple Substrates, Just Drill and Fix it.

DIMENSIONS - 8mm Hex Bolt Diameter, 100mm Bolt Length, 12mm Sleeve Diameter. Recommended Drill Bit Diameter = 12mm.

QUANTITY - Set of 8 Stainless Steel Anchor Fastener with Storage Box.

High-performance stud anchor with optimised expansion cone and wedge design combined with special steel and coatings for outstanding performance in cracked and uncracked concrete

Raised impact section prevents thread damage during installation

Pre-Fastening, Through-Fastening. Externally Threaded

Material composition: Steel, Zinc-plated. With SS Clip

Environmental conditions: Indoor, Outdoor, Dry & Wet Conditions

Item: Swing Anchor Fastener / Hook For Swing, 12 mm, 6 Piece.

Need to use 16mm diameter drill bit for drilling holes, the drilling depth should great than or equal to 9 cm

Ideal For many more things You can hammer this fastener into various kinds of substrates – be it concrete, solid, perforated or hollow bricks, natural stone, marble etc.

Load bearing: 250 KG, Approx, But Must insure that capacity of wall before you allly the load.

Screw diameter: Approx 16mm, Rod diameter: 12mm, Hook outer diameter: 5 cm, Inner diameter: 3 cm, Total Lendth of fastener: 6 Inch